Hisense TV Blinking Red Light | 5 Easy Ways to Fix!

Hisense TV Blinking Red Light

Hisense is a brand name in the market for smart TVs. The best LCD is Hisense TV but like all smart TVs, hardware or software problems occur after some time. Hisense TV blinking red light occurs when some problem is happening with the TV. Whenever the red light blinks in Hisense TV, don’t worry, we have explained in detail in this article how to fix the problem in Hisense TV.

In Hisense TVs, sometimes the red light blinks when the TV is turned on or after it enters standby mode. In this, the red light often blinks twice. To fix this you can restart the Hisense TV, this is the most manageable way. Many times there is a problem with the screen of Hisense TV, even then the red light blinks, at that time you have to check the backlight.

If your TV is connected to the wifi and the network is disconnected, you can find it. Sometimes TV problem occurs due to power board damage. So you need to check all cables and wires of the Hisense TV properly. None of the cables should be damaged or bent.

How to Fix Hisense TV’s Red Blinking:

Quick Answer:

If you are also troubled by a red light problem in hisense tv then you can fix it by power cycle to fix it. To do this unplug the TV from the mains power source and press and hold the power button on the TV for at least 30 to 60 seconds. This will reload all the firmware files inside the TV and hopefully fix the problem.

There can be many reasons for the blinking red light on Hisense TV. How to fix it is defined in fact below. You can reset or power cycle the Hisense TV.

Power Cycle Hisense TV:

Power Cycle Hisense TV

Power cycling can fix minor power issues with your TV. The process of power cycling a TV is very simple. your Hisense TV is in standby mode, and the red light on the TV blinks. If there is a software issue or a bug in the TV, it can be fixed with this process.

To power cycle the Hisense Smart TV-

  • Switch off the Hisense TV and unplug it from the power board.
  • The TV has to be left unplugged for at least 1 minute.
  • Then you have to press and control the TV’s power button for periodic moments. Doing this drains all the power of the TV.
  • Now the TV has to be put back on the wallboard and the TV has to be turned on.

The power cycle process in the TV solves a lot of the problems and it starts working fine. If the problem with the TV persists, you will need to check all cables.

Suggested Read: The Ultimate Guide to Fixing Hisense TV Problems

Hisense TV Factory Reset:

Hisense TV Factory Reset

If your TV has a blinking red light, then it is a major problem, if it is a software problem, it can be fixed by factory reset. Factory reset removes software errors and bugs present in the TV. Due to this, the TV works well and the red light also does not blink.

The first method To factory reset Hisense TV –

  • You need to press the exit button on the Hisense TV remote.
  • Then after a few seconds, you will see the Factory reset icon.
  • Now select OK and turn off the TV.

Your TV will be factory reset and you can now turn on the TV, the problem is resolved.

Second method To factory reset Hisense TV –

  • You need to press the menu button on the Hisense TV remote.
  • Select Support or OK and enter.
  • Then you will see self-diagnosis on the screen, select it.
  • Then select Reset.
  • You will need to enter a PIN which is 0000 by default.

you can factory reset your Hisense TV in two ways. Factory reset is a very easy method that fixes all the software problems in the device.

Check for Internet Connection Problems:

Check for Internet Connection Problems

Your Hisense TV does not receive network or display pictures while watching a video or show. Then the red light blinks on the Hisense TV. For this, you have to check the router so that the Hisense tv won’t turn on red light flashes. Because many times the network gets disconnected then you have to restart the router. To restart the router, unplug it from the wallboard and plug it back in behind for some time. By doing this, the blinking of the red light in Hisense TV stops and the TV works well.

Suggested ReadHow to Fix YouTube TV Freezing Issues in Easy Steps

Check for Faulty Backlight:

The red light on a Hisense TV blinks because of a Hisense TV blinking code or because of a faulty backlight in the TV. Many times you do not see any picture on the TV screen or till then the screen looks completely black. This is due to a faulty LED backlight in the TV.

You will need a flashlight to check if the TV has a backlight problem. You can also use the flashlight on your mobile. If you do this process in the dark then the result is faster and the process is easier to do.

First of all, you have to turn on the TV and shine the torch on its screen. You try to move the torch around so that you will see a blurry picture on the TV. In this, you come to know that there is a backlight problem in the panel of the TV. Also, if you only see the image of the flashlight on the TV, then the backlit is perfect.

Another way to check for a bad backlight in a TV is to remove the back panel from the TV and test the backlight LED. You will see the lamp in the panel of the TV, to check it you have to use a 3V power source. If you find a bad or faulty LED in it, replace it. Remember, do this procedure only if you know how to replace it, otherwise you can take the help of a professional electrician.

It is much easier and cheaper to replace the LED backlight in the TV with your own hands. After fixing the backlight problem, the red light on the Hisense TV stops blinking and the TV works fine. But if the problem with the TV persists, you can contact Hisense customer care. He will help you.

Inspect Power Supply Board:

Even after solving the backlight problem, if the Hisense TV still has a blinking red light, you’ll need to go ahead and check the power board. Because sometimes there may be rust in the electrical board, due to which the red light in the TV keeps on blinking again and again.

Sometimes a bad capacitor on the board causes a TV to have a black screen and a blinking red light. For this, whenever you see the panel in the power board, you have to find the bad capacitor in it. You can find capacitors in several solutions which are, the top of the capacitor bulging, the capacitor leaking, or the capacitor being pushed down. In this case, there may be a problem with the capacitor, which you can remove from the power board.

You can also check the capacitor with a multimeter, this is the easiest way to check the capacitor. If you get the wrong voltage reading of the capacitor on the multimeter then it is a faulty capacitor. which you need to change.

To remove the capacitor from the panel of the power board, you have to place a soldering iron near the pin of the capacitor and slowly remove it. By applying the soldering iron near the capacitor, pressure has to be applied from behind so that it comes out easily. Once the capacitor is out, you’ll need to install a new capacitor.

You have to install the new capacitor in the same way as the old or bad capacitor was removed. Before installing a new capacitor in the panel of the power board, its voltage reading has to be checked with a multimeter that it is correct.

Then you have to install a new capacitor in the panel with the help of a soldering iron. Now your power board is bulked up and maybe the red light on the Hisense TV stops blinking as well. If the problem with the TV persists, you can contact Hisense Customer support.

Contact Hisense Support:

Contact Hisense Support

Hisense is a brand name in the market for smart TVs. The best LCD is Hisense TV but like all smart TVs, hardware or software problems occur after some time. If the Hisense TV still has a blinking red light after you’ve tried all of the methods above, it could be a hardware problem. For this, you have to contact the support of your Hisense TV. He will send a professional technician to check your TV, or you can repair your TV at any TV or electronic shop.

Most Commonly Asked Questions:

Most Commonly Asked Questions

Why Is My Hisense TV Blinking Red Light?

If the red light flashes when you press the power button on your Hisense tv, the power board is faulty and needs to be replaced.

Why Is the Red Power Light on My TV Blinking?

If the red LED is blinking and the TV is not working properly, it means that the TV has detected an issue or problem. Most red LED blink conditions require service.

Why Is My Hisense TV Blinking but Not Turning On?

If the power light of your Hisense tv flashes at least 2 to 6 times or may flash blue, but the display does not turn on. So this problem may be due to a bad signal connection with your router or modem. Could be caused by a power deflection problem or a motherboard problem with your TV.

Why Is My Roku TV Flashing Red Light?

A blinking red light on your Roku device indicates a power problem. The reason for this problem to occur is when you use a power strip or surge protector to connect the device. It creates a layer between the Roku device and the wall socket. As a result, the device is unable to draw the required power supply for proper operation.

How Do I Reset My Hisense TV with a Black Screen?

If you also get a black screen on your Hisense tv then you should try resetting it. Unplug your TV and let it sit for at least 30 to 60 seconds. Now press and hold the power button of the TV for at least 30 to 40 seconds. Reconnect your Hisense TV after 60 seconds and it will work for sure.

Like this post? Could you share it with your friends?

Suggested Read –

 

My name is Tulip, and I am a contributor to electricalgang.com! As a contributor, I write articles on various topics related to electrical engineering, including product reviews, how-to guides, and tips and tricks.

Leave a Comment