Top 6 Easy Ways to Ecobee Thermostat Calibrating

Ecobee Thermostat Calibrating

I have been living alone for a long time, and Alexa is a good friend of mine. But once I’ve installed Ecobee, I’m not sure if I need Echo Dot anymore. With the amazing feature of the Thermostat, I love how I can listen to music on Spotify while I’m working from home.

A few days ago, I turned off my Ecobee before spending a few days at my parent’s house. I had to reboot the Thermostat when I got back home. When I looked at my screen, it said: “Calibrating: heating and cooling disabled.” I was confused about what this message meant. The only thing I could understand about it was that my room would stay at a uniform temperature for a while because the heating was disabled. In hindsight, I’m glad the screen wasn’t as empty as it once was.

To keep my thinking mind at bay, I started researching what this message meant. After I read many articles online, I was able to understand the meaning and how to troubleshoot if something went wrong. Here is a compilation of everything I found.

The “Calibrating” message on your Ecobee Thermostat screen indicates that it is measuring the current indoor temperature. Ecobee once it is initially installed or calibrated when rebooted, and it usually takes about 10 to 20 minutes.

What Does It Mean When Ecobee Thermostat “Calibrating”?

What Does It Mean When Ecobee Says “Calibrating”?

Calibration helps your Ecobee Thermostat get accurate temperature readings inside your home or office. Ecobee uses its built-in sensor to measure temperature, which also helps it measure humidity and room space. Generally, calibration occurs immediately after installation and whenever you reboot your device. According to your thermostat screen, the heating and cooling facilities will be disabled this time.

Suggested Read: Whirlpool Dryer Not Heating? | Here’s What to Do!

Calibration After Initial Installation

You can install Ecobee yourself in approximately 45 minutes. Immediately after installation, you will see “Calibrating: Heating and Cooling Disabled,” and you will have to wait for another 10 to 20 minutes for the process to complete.

This message makes it clear that you will not be able to use your heater or air conditioner during this time. If the thermostat display says to calibrate after 20 minutes, there may be something wrong with the wiring.

It is best to try to remove the Thermostat from the wall plate and then check your wire. Check that all wires are connected to the appropriate terminal. You can use the following guide to see which wire letter corresponds to which color.

Wire Wire Color
C Blue or Black
G Green
R, RC, or RH Red
W White
Y or Y1 Yellow

If you think there is something wrong with the wiring, it is best to call the nearest electrician and ask them to come and see the wiring.

Calibration After Ecobee Reboots

Calibration After Ecobee Reboots

The second time Ecobee is calibrated when you reboot it. Here are the reasons for your Ecobee restart.

  • There is a power outage in your area.
  • Your Ecobee has a firmware update.
  • Furnace overheating.
  • Your air conditioner is full of water.
  • There is a defect in the wire of your Thermostat.

If the reason is that power has been lost in your home, then all you need to do is wait for the power to return, and your Ecobee will be calibrated automatically. When the cause is bad firmware, calibration may take more than 20 minutes. However, it will not last more than an hour. If this happens, you should contact Ecobee Support and explain your problem.

Suggested Read: Samsung Refrigerator Is Not Cooling | Tips and Tricks!

Ecobee Calibration Troubleshooting

Even calibration is part of the process of adjusting your temperature. Some of the ways it can go wrong. Here are the troubleshooting methods if you ever face an issue.

What To Do If Ecobee Keeps Rebooting?

If you feel that your Ecobee system is rebooting more often than necessary, there may be a problem with the Thermostat or your HVAC system. You should check that you have replaced the filter on your furnace or cleaned your A/C drain pan.

If the problem is more serious than fixing the wiring or the problems with the capacitor, you must hire a qualified technician to find out how to fix the problem.

Ecobee Calibrating For Too Long

 

Ecobee Calibrating For Too Long

An ideal Ecobee measures approximately 10 to 20 minutes. It should not take longer than that. Even after half an hour, if you see the message, it is probably a mistake. Try turning on your Thermostat when this happens. You can pull it off the wall, wait about 5 minutes, and plug it in again. The power cycle can help solve the problem.

After rebooting, wait for the calibration to start and check if it stops in 20 minutes. Another way to fix the problem is to unplug your router and modem for at least 1 to 2 minutes and plugin again. If it still takes more than 20 minutes, you should take it with Ecobee support.

Suggested Read: LG Dryer Not Heating Up Enough: FIXED

Incorrect Ecobee Thermostat Calibration

Incorrect Ecobee Thermostat Calibration

The final result of the calibration is considered to be a very accurate reading of your room temperature. A slight change is perfectly normal, but if the temperature is not even close to the appropriate value, this means that the calibration does not work. Fortunately, you can adjust your temperature reading manually.

Follow the steps below to solve this problem

  • First, go to the menu on your Ecobee screen.
  • Select ‘Installation Settings’ from the Settings menu.
  • Now go to Threshold and select ‘Temperature Correction.’
  • You can adjust the temperature as you see fit.

Ecobee Calibrating Heat Cool Disabled

In short, when your Ecobee Thermostat says, “Calibrating: heating and cooling are disabled,” it means that the thermostat sensor is working on getting an accurate reading of the current temperature of your home. This calibration process occurs after you install your Thermostat and reboot time.

Suggested Read: Heat Sensor Circuit | Operating Principle of Heat Sensor Circuit

Ecobee Thermostat Calibrating Heat Cool Disabled

In short, when your Ecobee Thermostat says, “Calibrating: heating and cooling are disabled,” it means that the thermostat sensor is working on getting an accurate reading of the current temperature of your home. This calibration process occurs after you install your Thermostat and reboot time.

Frequently Asked Questions

Most Commonly Asked Questions

Is there a way to calibrate my Ecobee Thermostat?

  • To configure temperature correction.
  • First, the menu button on the main screen.
  • Go to setting.
  • Then go to installation settings.
  • Select threshold.
  • Then select Temperature Correction.
  • Adjust the temperature reading according to your needs.

Can Ecobee sensors be calibrated?

If, even after rebooting your Ecobee, the sensor still sends an inaccurate temperature readout, you can look at the Thermostat and change the temperature calibration on the Ecobee. This will allow you to adjust the overall temperature of the Thermostat and sensor up or down according to your needs.

What does it mean when Ecobee says calibrating Heat cool disabled?

In short, when your Ecobee Thermostat says, “Calibrating: heating and cooling are disabled,” it means that the thermostat sensor is working on getting an accurate reading of the current temperature of your home. This calibration process occurs after you install your Thermostat and reboot time.

Why does my Ecobee say calibrating?

The “Calibrating” message on your Ecobee Thermostat screen indicates that it measures the current indoor temperature. Ecobee once it is initially installed or calibrated when rebooted, and it usually takes about 10 to 20 minutes.

Why is my Ecobee not connecting to WiFi?

This could be due to a gap or interruption between your router and Ecobee, due to old firmware, or power outages on your router.

Like this post? Could you share it with your friends?

Suggested Read –

Final Thoughts

Ecobee is hard to beat in the thermostat market. Although you can’t use your Thermostat for about half an hour, calibration makes your Ecobee work better. With its new remote sensor, which measures both temperature and occupancy, even the coldest parts of my house get heated within minutes of me entering it.

Andrew is a researcher and tech writer passionate about all things tech. He has written for many different publications and websites and has a wealth of knowledge to share.

Leave a Comment