ElectricalGang

  • DC Machine
  • Electrical Drive
  • Motor
  • Starter
  • SwitchGear
  • Transformer

How to Fix Samsung Soundbar Remote Not Working Problem?

by Vishnu Patil Leave a Comment

How to Fix Samsung Soundbar Remote Not Working Problem?

Samsung is a well-known and respected brand, and nowadays, it has a wide variety of electronics available. Such as tv, fridge, soundbar system, washing machine, etc. Today we are going to talk about the speaker of Samsung.

You can also use this speaker for your smart tv, computer. Every such smart system can be controlled by remote control. If the remote of such a cool system does not work, then it is a pity for the consumer. It was a frustrating time when the remote of this system stopped working.

To avoid this problem, we started researching on the internet, and we are going to share what we found out here today.

If the Samsung Soundbar Remote is Not Working, you must first discharge its battery. Now hold any button on the remote for at least 30 to 40 sec. Doing this process will drain the extra charge in the circuit. Now put the battery back in the remote and check if your remote works.

If your remote does not work even after this process, you can use a digital camera to check the operation of the remote. Turn on the camera. Now, set the remote of your Soundbar at a distance of at least 10 to 12 inches from the camera lens. After this setup, press any one of the buttons on the remote.

Now take a special look at whether you can see the infrared beam from the remote flashing on the screen of the digital camera if you can see the infrared light of the remote on the display of the camera’s LCD, then the remote works properly.

In today’s article, we will discuss in detail the possible reasons why the Samsung soundbar remote is not working and its solution.

Table of Contents

  • Why does Samsung Soundbar Remote Volume Don’t Work?
    • Samsung Soundbar Remote Battery Cover Stuck:
  • How to Fix Samsung Soundbar Not Working with Samsung TV?
    • Replace Remote Battery:
      • How to Do Remote Power Cycle?
    • Hard to Reset Soundbar and Samsung TV:
      • Hard to Reset Soundbar:
      • Hard to Reset Samsung TV:
    • Check If the Soundbar Is Connected to Bluetooth?
    • Check That Soundbar Is Selected as the Default Device:
    • Reset Soundbar to Default Setting:
    • Why Samsung Soundbar Remote Sensor Doesn’t Work:
      • Samsung Soundbar Will Not Set Remote ID:
      • Frequently Asked Questions (FAQs):
        • Conclusion:

Why does Samsung Soundbar Remote Volume Don’t Work?

Why does Samsung Soundbar Remote Volume Don't Work?

If you are using a Samsung Soundbar, our Samsung Soundbar Remote is important to check that you have the level of Sound you need to hear and see.

If your Soundbar remote volume doesn’t work, especially if you have a Samsung TV of any other brand, this could be due to a problem with your audio output or in the tv’s audio setting.

In case your Samsung Soundbar Sound does not work, you can go to settings on your TV remote. Go to Sound, then go to Sound Output. As you can see, the Samsung Soundbar is now appearing as an option. Select this, and you can use the TV remote to increase the volume of the Soundbar.

If your problem still does not improve after this procedure, go to your TV’s Soundbar setting. Then select Additional Settings and Digital Audio Out and then convert your audio format to Dolby Digital. Alternatively, you can try a factory reset of your Samsung Soundbar and TV.

Samsung Soundbar Remote Battery Cover Stuck:

Samsung Soundbar Remote Battery Cover Stuck

If you do not change the battery of the remote for a long time, it will weaken and will not give a proper performance. If you notice a change in the battery of your Samsung Soundbar remote and its battery cover suddenly hangs, this can be a frustrating thing. There is a risk of cracking if you try to force open the cover.

If the remote of your Samsung Soundbar does not work and its battery cover hangs. Then with the help of both thumbs, press down towards the part of the cover of your remote, which is pressed. Be sure to push down while pushing both ends of the remote with uniform pressure to release the cover so you can remove it.

Suggested Read: Why Samsung TV Remote Not Working | How To Fix In Seconds [2022]

How to Fix Samsung Soundbar Not Working with Samsung TV?

Before we proceed, check that you have restarted your Samsung TV and Soundbar using Remote. Restart is an easy and very useful method, one of the most useful things for solving small and big problems.

Replace Remote Battery:

Replace Remote Battery

One thing to note here is that the Samsung Soundbar is also used to control the Samsung tv remote if all the items work properly. If our remote does not reach the power supply required for the Soundbar, it may be time to replace its battery.

So carefully remove the back of the remote and insist on using a new fresh, and quality battery instead of the old one.

How to Do Remote Power Cycle?

When you remove the battery from your remote, you need to press any button on the remote for at least 5 minutes. Doing this will drain the remaining power in the remote.

After this process, place the fresh battery in the remote in its compartment and then perform the necessary tests.

Suggested Read: Samsung TV Volume/Sound Not Working: FIXED

Hard to Reset Soundbar and Samsung TV:

While you are sure that your remote has no defects of any kind and it is serving itself perfectly, so at such times, you can try to hard reset your Soundbar and Samsung tv.

Hard to Reset Soundbar:

You will need to perform the following steps to perform a hard reset of the Soundbar:

  • First, you turn off your Soundbar using the Samsung Remote.
  • You press the power button once to make sure the Soundbar is turned off properly.
  • Now disconnect the main power plug from your Soundbar.
  • Then wait at least 5 to 10 minutes and re-power it after this time interval.

Hard to Reset Samsung TV:

To hard reset Samsung’s tv, you need to take the following steps:

  • First, turn off your Samsung TV with the help of remote control.
  • Now disconnect the TV’s power cord from its main power supply.
  • Wait at least 10 to 15 minutes for the hard reset to work properly.
  • Now plug in the power cord of your tv again and turn on the power.

To avoid the problem of each power transmitting, you plug each device directly into the wall plug.

Check If the Soundbar Is Connected to Bluetooth?

Check If the Soundbar Is Connected to Bluetooth?

If your Soundbar is not turned on by the TV remote, then it may be disconnected. Many users think that they have connected their Samsung Smart TV to Soundbar. He then realizes that the very moment he tries to make the pair fails.

In this system, the first thing you want to do is make sure the Bluetooth connection is working on both your devices. Lastly, you can’t pair up if your Bluetooth isn’t turned on. So go into the setting and make sure to enable it.

This will take us straight to the connection effort, and if everything works properly, the Samsung TV will be immediately connected to your Soundbar.

Suggested Read: Roku Volume Control Not Working | How To Troubleshoot [2022]

Check That Soundbar Is Selected as the Default Device:

The thing to know is that the consumer makes this mistake when installing the Samsung Soundbar. Or forget to choose their freshly connected Soundbar as the default audio device.

To adjust the soundbar setting, you need to take the following steps:

  • First, you go to the setting on your Samsung TV.
  • Now find the Sound tab and press OK once and enter.
  • Then go to the Output Audio Device feature and once click on the ok button.
  • In the menu, continue scrolling down until you see a connection named Samsung Soundbar.
  • Once you get this option, click on it, and since then, your Soundbar will be the default device that is going to use your smart tv.

To reverse any of these debts, go back to the list of options and choose which device you would like to use as the default.

Reset Soundbar to Default Setting:

Reset Soundbar to Default Setting

You can try resetting your Soundbar to the default setting. You can also choose the option of factory reset when your Soundbar is unable to work with your Samsung Smart TV.

Special Note: You select the Factory Reset option only when no options are left.

To perform a factory reset of your Soundbar, you need to take the following steps:

  • First, you turn on your Soundbar.
  • Now press and hold the Power Button and the Volume Button together on your remote.
  • Then disconnect the Soundbar from its main power plug, and let it sit for at least 10 to 15 minutes.
  • Plugin again after this time interval.

This time, your Soundbar should be reverted to the factory default setting and should be resolved if this issue is related to a software defect.

Suggested Read: Why My Element TV Remote Not Working? | Try These Fixes 2022

Why Samsung Soundbar Remote Sensor Doesn’t Work:

While the sensor of the Samsung Soundbar’s remote does not work, so this literally means that you are not able to do anything, such as to increase or decrease the volume or to change the channel, etc. If the remote doesn’t work, it can affect your family watching their favorite shows. Keep reading for solutions to this problem.

If the Samsung Soundbar’s remote and sensor do not work, try replacing the remote’s battery before trying any solution. After this process, check that there is no barrier between the TV and the remote. You wipe the front of the remote with a soft, clean cloth and then try to use it again.

You can also check this with the help of a digital camera, for which we have explained the complete information from the area in the part of the introduction.

Samsung Soundbar Will Not Set Remote ID:

If you set the ID to your Samsung Soundbar remote. This will then simply mean that you have successfully connected the Soundbar to the subwoofer. If this connection does not happen, then it is a matter of sorrow for the consumer.

If our Samsung Soundbar remote doesn’t work and ID doesn’t connect successfully, you can turn off Soundbar. Now press the up button or the volume button on the soundbar remote. Hold this button for about six seconds until you see the ID Set message on your Samsung Soundbar remote.

Frequently Asked Questions (FAQs):

Frequently Asked Questions

Why is my Samsung soundbar remote not working?

If the Samsung Soundbar does not work, check that your Soundbar is in working condition. Then hold down the WOOFER button until an “On-TV Remote” appears on display for approximately 10 seconds. You will then need to connect with an optical cable or an HDMI cable.

How do I reset my Samsung soundbar remote?

You can use a remote control or a dedicated button in your Soundbar. Hold down the Power button on the Soundbar control panel. Continue pressing the power button until you see the ‘INIT OK’ message on the display panel. Wait until the soundbar restarts.

Why is my Soundbar remote not working?

Remove the battery from the remote of your Soundbar and press each button at least two times; this will drain the remaining power in the isolated circuit. After this process, put the battery back in its slot and test the remote.

Like this post? Could you share it with your friends?

Suggested Read –

  • Samsung TV Plus Not Working: What To Do?
  • Difference Between Capacitor and Inductor | Capacitor vs Inductor
  • What is the Voltage Divider Rule? | Voltage Divider Calculation | Application of Voltage Divider
  • What is a Biosensor | Types of Biosensor | Working Principle of Biosensor | Applications of Biosensor
  • What is an Ohmmeter? | Ohmmeter Working Principle | Types of Ohmmeter | Applications of Ohmmeter
  • What is a Signal Isolator? | Working Principle of Signal Isolator | Types of Signals Isolators | Applications of Signals Isolators
Conclusion:

In today’s article, we have covered almost all the problems of Samsung Soundbar Remote Not Working and talked about its solution. If the above answer does not solve your problem, then you can contact Samsung Support Team.

Filed Under: Repair Guide

About Vishnu Patil

Hey, I am Vishnu Patil and I'm an Electrical Engineer and Electrical maestro. I have more than 10 years of experience with electricals. Through ElectricalGang I want to spread my knowledge with everyone else.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • Top 10 Best Wire And Cables Company In India
  • Netflix Not Working on Vizio Smart TV | Quick Fix Guide
  • Toshiba Fire TV Remote Not Working? | Fix in Easy Methods
  • Netflix Not Working on LG TV | Fix in Seconds (2022)
  • Hulu App Not Working on Samsung TV | FINALLY FIXED!

Brain Behind ElectricalGang

Hey, I am Vishnu Patil and I'm an Electrical Engineer and Electrical maestro. I have more than 10 years of experience with electricals. Through ElectricalGang I want to spread my knowledge with everyone else.

You can find him on Facebook, Twitter, Instagram and Google News.

ADVERTISE

 

At ElectricalGang, we clarify Electrical engineering and publish all the happenings & news of Electrical engineering.

Get Traffic & Exposure. We help brands optimize their online presence & performance.

MORE DETAIL

HelpFul Links

  • ESPN Plus is Not Working
  • Roku Airplay Not Working
  • Airplay Not Working on LG TV 
  • Hulu App Not Working on Samsung TV
  • DIRECTV Remote Volume Not Working
  • Disney Plus Keeps Changing Language

About Me | Contact Us | Privacy Policy | Sitemap 

© Copyright 2020-2022 ElectricalGang.com | The Content May Not Be Reproduced On Other Websites | Website Maintained By Vishnu Patil